Pendant original shape #anycubic3d 3D for print
2864 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
model on fusion 360 then print in two white parts
for the wire I took over the wire of another broken jewelry the jewelr...y is in two stl file if you want to print it in two different colors #ANYCUBIC3D
white filament
layer thickness 0.10 mm
print with support on both parts of the jewelry
printing time approx. 40 m...in
weight 3g
Designer
TIMOTHEMARSOT3d model description
pendant original form whitemodel on fusion 360 then print in two white parts
for the wire I took over the wire of another broken jewelry the jewelr...y is in two stl file if you want to print it in two different colors #ANYCUBIC3D
3d model print parameters
print on my dagoma discoeasy 200white filament
layer thickness 0.10 mm
print with support on both parts of the jewelry
printing time approx. 40 m...in
weight 3g
![[Old Version] Lars' Ultralight Ultimaker XY Blocks](https://www.3dforprint.com/modelos/4649/old-version-lars-ultralight-ultimaker-xy-blocks1_medium.jpg)
