Periscope 3D for print
1310 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Print 2 copies of ...the included .stl file. I printed it in ABS at .2mm layer height with 20% infill. No support is needed. Glue the mirror to the inside of the printed parts. I used a hot glue gun. Cut a section of vinyl gutter. I used a piece about 18" long. It's up to you how long of a periscope you want to make. Glue the printed pieces to the gutter section. Be sure to glue them facing opposite directions. Again, I used a hot glue gun.
-(1) section of 2"x3" vinyl gutter
http://www.homedepot.com/p/Amerimax-Home-Products-2-in-x-3-in-White-Vinyl-Downspout-M0593/100...095267
- (2) 3"x3" mirrors
http://www.michaels.com/artminds-square-mirror-value-pack/10334162.html
Designer
ApacheXMD3d model description
This is a periscope made out of two printed parts, a vinyl downspout from the hardware store, and two mirrors from the craft storePrint 2 copies of ...the included .stl file. I printed it in ABS at .2mm layer height with 20% infill. No support is needed. Glue the mirror to the inside of the printed parts. I used a hot glue gun. Cut a section of vinyl gutter. I used a piece about 18" long. It's up to you how long of a periscope you want to make. Glue the printed pieces to the gutter section. Be sure to glue them facing opposite directions. Again, I used a hot glue gun.
3d model print parameters
- (2) printed parts-(1) section of 2"x3" vinyl gutter
http://www.homedepot.com/p/Amerimax-Home-Products-2-in-x-3-in-White-Vinyl-Downspout-M0593/100...095267
- (2) 3"x3" mirrors
http://www.michaels.com/artminds-square-mirror-value-pack/10334162.html
![Front damper bridge [Reely Rhino]](https://www.3dforprint.com/modelos/4107/front-damper-bridge-reely-rhino1_medium.jpg)
