6-piece magnetic female pelvis model 3D for print
1552 Views 2 Likes 0 Downloads Download
See here for video: https://youtu.be/djYy23eG_EU
To assemble you will need 16 1/4” x 1/8” strong cylindrical neodymium magnets. To use the display base, you will also need an 8” section of ¼” square keystock.
Here are considerations for assembly:
• Before inserting magnets, clean out the magnet anchors with a 1/4” drill bit to remove any imperfections, allowing the magnets to sit properly.
• Ensure that you insert magnets with polarity oriented to allow proper connection of bones.
• You may need to use glue to secure some of the magnets in place. CA glue works well.
Except for the sacrum, all bones are oriented in reasonable positions for printing.
The sacrum is a very difficult bone to print no matter how it is oriented, so you will need to position this according to your experience, preferences, and set-up. The bone pictured in the model was printed upside down, with ample support at the bottom.
Every attempt has been made to maintain anatomical correctness; however, the following small modifications were necessary to optimize the files for 3D printing:
• Some areas of bone have been thickened to support the magnet anchors.
• Thin parts of the medial sacral crest have been thickened or removed to improve printing strength and quality.
• With the exception of a few centimeters at the top and bottom, the spinal canal and the complex tunnels of the cauda equina have been filled in to allow for better printing strength and quality.
Development of this model was initiated and guided by Health Allies, a small regional Osteopathy clinic in Orange NSW, Australia with 4 practicing Osteopaths from various Universities across Australia. The model will be used for visual learning purposes, from patient education in the clinic, to assisting with continuing learning with other medical professionals.
Here are more of my anatomical designs you might enjoy:
Novelty:
Wearable Spine: https://www.thingiverse.com/thing:4982223
Skull Jewelry Set: https://www.thingiverse.com/thing:4980129
Happy Halloween Spine: https://www.thingiverse.com/thing:4979522
Eyeball Windchime: https://www.thingiverse.com/thing:4978632
Fingerbone Windchime: https://www.thingiverse.com/thing:4962956
Skull Windchime: https://www.thingiverse.com/thing:4962814
Creepy Custom Embossed Spine: https://www.thingiverse.com/thing:4916377
Mini Articulating Spine Keychain: https://www.thingiverse.com/thing:4891846
Big Bowl O’ Back Bones: https://www.thingiverse.com/thing:4881377
Vertebral Stacking Blocks: https://www.thingiverse.com/thing:4868387
Anatomically Correct Voronoi Heart: https://www.thingiverse.com/thing:4636146
Vertebrae with Secret Compartment: https://www.thingiverse.com/thing:4633188
Brain Puzzle: https://www.thingiverse.com/thing:4158232
Anatomical Heart Puzzle: https://www.thingiverse.com/thing:4146688
Educational:
6-Piece Magnetic Female Pelvis Model: https://www.thingiverse.com/thing:4946668
Fryette’s Laws Teaching Tool: https://www.thingiverse.com/thing:4887712
Hip and Pelvis Model: https://www.thingiverse.com/thing:4875641
Flexible Three-Quarter Spine Model with Display Stand: https://www.thingiverse.com/thing:4863003 Full Size Anatomically Correct Human Foot Model: https://www.thingiverse.com/thing:4849504
Full Size Anatomically Correct Human Hand Model: https://www.thingiverse.com/thing:4841107
Full Size Anatomically-Correct 18-Piece Magnetic Human Skull Model: https://www.thingiverse.com/thing:4830026
Full-sized Anatomically Correct Articulating Spine: https://www.thingiverse.com/thing:4801717
Articulating Lumbar Vertebrae: https://www.thingiverse.com/thing:4637241
Designer
DaveMakesStuff3d model description
This full-sized, anatomically-correct 6-piece female pelvis model includes the sacrum, 5th lumbar vertebrae, left and right hemipelvis, and proximal p...ortions of the left and right femur. An optional stand base is also provided.See here for video: https://youtu.be/djYy23eG_EU
To assemble you will need 16 1/4” x 1/8” strong cylindrical neodymium magnets. To use the display base, you will also need an 8” section of ¼” square keystock.
Here are considerations for assembly:
• Before inserting magnets, clean out the magnet anchors with a 1/4” drill bit to remove any imperfections, allowing the magnets to sit properly.
• Ensure that you insert magnets with polarity oriented to allow proper connection of bones.
• You may need to use glue to secure some of the magnets in place. CA glue works well.
Except for the sacrum, all bones are oriented in reasonable positions for printing.
The sacrum is a very difficult bone to print no matter how it is oriented, so you will need to position this according to your experience, preferences, and set-up. The bone pictured in the model was printed upside down, with ample support at the bottom.
Every attempt has been made to maintain anatomical correctness; however, the following small modifications were necessary to optimize the files for 3D printing:
• Some areas of bone have been thickened to support the magnet anchors.
• Thin parts of the medial sacral crest have been thickened or removed to improve printing strength and quality.
• With the exception of a few centimeters at the top and bottom, the spinal canal and the complex tunnels of the cauda equina have been filled in to allow for better printing strength and quality.
Development of this model was initiated and guided by Health Allies, a small regional Osteopathy clinic in Orange NSW, Australia with 4 practicing Osteopaths from various Universities across Australia. The model will be used for visual learning purposes, from patient education in the clinic, to assisting with continuing learning with other medical professionals.
Here are more of my anatomical designs you might enjoy:
Novelty:
Wearable Spine: https://www.thingiverse.com/thing:4982223
Skull Jewelry Set: https://www.thingiverse.com/thing:4980129
Happy Halloween Spine: https://www.thingiverse.com/thing:4979522
Eyeball Windchime: https://www.thingiverse.com/thing:4978632
Fingerbone Windchime: https://www.thingiverse.com/thing:4962956
Skull Windchime: https://www.thingiverse.com/thing:4962814
Creepy Custom Embossed Spine: https://www.thingiverse.com/thing:4916377
Mini Articulating Spine Keychain: https://www.thingiverse.com/thing:4891846
Big Bowl O’ Back Bones: https://www.thingiverse.com/thing:4881377
Vertebral Stacking Blocks: https://www.thingiverse.com/thing:4868387
Anatomically Correct Voronoi Heart: https://www.thingiverse.com/thing:4636146
Vertebrae with Secret Compartment: https://www.thingiverse.com/thing:4633188
Brain Puzzle: https://www.thingiverse.com/thing:4158232
Anatomical Heart Puzzle: https://www.thingiverse.com/thing:4146688
Educational:
6-Piece Magnetic Female Pelvis Model: https://www.thingiverse.com/thing:4946668
Fryette’s Laws Teaching Tool: https://www.thingiverse.com/thing:4887712
Hip and Pelvis Model: https://www.thingiverse.com/thing:4875641
Flexible Three-Quarter Spine Model with Display Stand: https://www.thingiverse.com/thing:4863003 Full Size Anatomically Correct Human Foot Model: https://www.thingiverse.com/thing:4849504
Full Size Anatomically Correct Human Hand Model: https://www.thingiverse.com/thing:4841107
Full Size Anatomically-Correct 18-Piece Magnetic Human Skull Model: https://www.thingiverse.com/thing:4830026
Full-sized Anatomically Correct Articulating Spine: https://www.thingiverse.com/thing:4801717
Articulating Lumbar Vertebrae: https://www.thingiverse.com/thing:4637241
