Pokemon pikachu 3D for print
254 Views 0 Likes 0 Downloads Download
If you sign up as a new member at fab365.net and leave a comment with your registered account email address, you will receive a "F...ree Item - Download Ticket" that can be used at Fab365!
When you sign up for fab365.net, you will receive one “Free Item - Download Ticket” immediately, and you can receive one more by leaving a comment here.
If you were asked to choose one of the most loved game characters, many people would probably choose Pikachu from Pokemon. That is why so many of them are made for 3D printing. However, it is difficult to express the characteristics of hand-drawn animation and early game graphics in three dimensions. Therefore, although there are many Pikachus designed for 3D printing, 3D printed Pikachu often does not reflect the original form well as a movable form.
So this time, I designed it so that it could move but still reflect the characteristics of the original painting.
We designed it so that as many parts as possible, including ears, head, arms, legs, and tail, could move, while trying to reflect the feel of 2D animation and drawing as much as possible.
Although there are some regrets, I think the design has been completed in a way that is close to the original intention.
It has few parts and is very easy to make, but there are a few caveats.
The tail is divided into two parts. When attaching them, please pay attention to the shape before attaching them. Otherwise, it may end up being reversed.
The support inside the head must be cut, removed and assembled.
The left and right pupils are different, so you need to pay attention to the angle before attaching them.
The left and right sides of the ball are different, so check carefully before attaching.
This time, I felt once again that designing 2D into 3D is very difficult, and I hope that this effort will lead to a positive response from many makers who love Pokemon.
Largest part in printing, size = X 63mm, Y 89mm, Z 49mm, After full assembly size= X 69mm, Y 45mm, Z 99mm
Total Build Time : 9h 25m / Plastic Weight : 41g
Designer
Gucati3d model description
Get Free Ticket!If you sign up as a new member at fab365.net and leave a comment with your registered account email address, you will receive a "F...ree Item - Download Ticket" that can be used at Fab365!
When you sign up for fab365.net, you will receive one “Free Item - Download Ticket” immediately, and you can receive one more by leaving a comment here.
If you were asked to choose one of the most loved game characters, many people would probably choose Pikachu from Pokemon. That is why so many of them are made for 3D printing. However, it is difficult to express the characteristics of hand-drawn animation and early game graphics in three dimensions. Therefore, although there are many Pikachus designed for 3D printing, 3D printed Pikachu often does not reflect the original form well as a movable form.
So this time, I designed it so that it could move but still reflect the characteristics of the original painting.
We designed it so that as many parts as possible, including ears, head, arms, legs, and tail, could move, while trying to reflect the feel of 2D animation and drawing as much as possible.
Although there are some regrets, I think the design has been completed in a way that is close to the original intention.
It has few parts and is very easy to make, but there are a few caveats.
The tail is divided into two parts. When attaching them, please pay attention to the shape before attaching them. Otherwise, it may end up being reversed.
The support inside the head must be cut, removed and assembled.
The left and right pupils are different, so you need to pay attention to the angle before attaching them.
The left and right sides of the ball are different, so check carefully before attaching.
This time, I felt once again that designing 2D into 3D is very difficult, and I hope that this effort will lead to a positive response from many makers who love Pokemon.
Largest part in printing, size = X 63mm, Y 89mm, Z 49mm, After full assembly size= X 69mm, Y 45mm, Z 99mm
Total Build Time : 9h 25m / Plastic Weight : 41g
