Pin no animal testing #anycubic3d 3D for print
2182 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
created on the tinkercad software and printed with the elegoo mars.
Unfortunately I no longer have a spindle ...holder.
I apologize because I can't put the picture right side up.
printing time 4h38
layer thickness: 0.05mm
number of lower layer: 8
exposure time: 10s
basic exposure time: 90s
swi...tch-off delay: 0s
switch-off time base: 0s
distance base lift: 5mm
lifting distance: 5mm
lifting speed base: 65mm
lifting speed: 65mm
Retraction speed 150mm
Designer
GREG270003d model description
pin against animal testing.#ANYCUBIC3Dcreated on the tinkercad software and printed with the elegoo mars.
Unfortunately I no longer have a spindle ...holder.
I apologize because I can't put the picture right side up.
3d model print parameters
size 40mm wide and 45mm highprinting time 4h38
layer thickness: 0.05mm
number of lower layer: 8
exposure time: 10s
basic exposure time: 90s
swi...tch-off delay: 0s
switch-off time base: 0s
distance base lift: 5mm
lifting distance: 5mm
lifting speed base: 65mm
lifting speed: 65mm
Retraction speed 150mm
![rabbit [FREE]](https://www.3dforprint.com/modelos/7794/rabbit-free1_medium.jpeg)
