Pocket ratchet wrench 3D for print
3876 Views 3 Likes 1 Downloads Download the piece here from 3dforprint
Simple small 3/8in pocket ratchet set, flip from side... to side for loosening and tightening. Included 5mm to 13mm sockets.
Use Part 2 and part 3 for internals, V2 of them can be troublesome.
Results may vary on printing. Higher quality is better! :)
Printed at 215-230C 40-50mm/s at 0,1mm. Retraction Enabled.
Designer
Cleven3d model description
Tighten, Flip, Loosen ! ! ! ! Is that a ratchet in your pocket or are you just happy to see me?Simple small 3/8in pocket ratchet set, flip from side... to side for loosening and tightening. Included 5mm to 13mm sockets.
Use Part 2 and part 3 for internals, V2 of them can be troublesome.
Results may vary on printing. Higher quality is better! :)
Printed at 215-230C 40-50mm/s at 0,1mm. Retraction Enabled.
