Pokeball keychain multicolor 3D for print
3762 Views 2 Likes 1 Downloads Download the piece here from 3dforprint
saw the amazing design by Movilujo and printed a few of his, his design is so good i got inspired and decided i wante...d to do "the same" from scratch, since i'm learning to use fusion 360 and others.
oh man this was hard! designed it with gaps i thought it would be enough, some parts got bigger after i printed, wich never occured to me, so i did some adjustments and saved a V2, wich got too lose, the parts would fit but would go wibbly wobbly inside each other...
so after some measuring and calculating that Nasa would be proud, i did a v3. the ring is thinner and larger than original, i wanted it to be completly round, man i don't even know what i'm saying anymore... so confusing.
Anyway, added all 3 versions separated in RAR files, the one that worked great for me was V3 with the thicker pins wich are also uploaded.
printed all parts in the same color for testing, printed the whole pokeball in 51 minutes.
after the v3 printed out perfect as i wanted i started doing it in all colors and there it is!
im proud of it.
did it with less supports needed, cause i hate supports hahaha
has an inside pin i used super glue on, i glued the rings and pins into the top and bot parts, worked out for me!
PS: the blue one is Movilujo's design i made thicker cause mine kept breaking, it's there cause his design is great and to compare sizes with mine.
Thanks for the Design Movilujo!
any questions leave in comments and i will answer asap!
Designer
3DEGON3d model description
So here we go, long text ahead!saw the amazing design by Movilujo and printed a few of his, his design is so good i got inspired and decided i wante...d to do "the same" from scratch, since i'm learning to use fusion 360 and others.
oh man this was hard! designed it with gaps i thought it would be enough, some parts got bigger after i printed, wich never occured to me, so i did some adjustments and saved a V2, wich got too lose, the parts would fit but would go wibbly wobbly inside each other...
so after some measuring and calculating that Nasa would be proud, i did a v3. the ring is thinner and larger than original, i wanted it to be completly round, man i don't even know what i'm saying anymore... so confusing.
Anyway, added all 3 versions separated in RAR files, the one that worked great for me was V3 with the thicker pins wich are also uploaded.
printed all parts in the same color for testing, printed the whole pokeball in 51 minutes.
after the v3 printed out perfect as i wanted i started doing it in all colors and there it is!
im proud of it.
did it with less supports needed, cause i hate supports hahaha
has an inside pin i used super glue on, i glued the rings and pins into the top and bot parts, worked out for me!
PS: the blue one is Movilujo's design i made thicker cause mine kept breaking, it's there cause his design is great and to compare sizes with mine.
Thanks for the Design Movilujo!
any questions leave in comments and i will answer asap!
