Pokemon chess set - different pawns 3D for print
2089 Views 2 Likes 1 Downloads Download the piece here from 3dforprint
For one full set:
(Color One)
1 - King Mew
1 - Queen Pikachu
2 - Bishop Bulbasaur
2 - Knight Charmander
2 - Rook Squirtle
1 - Pawn Ditto
1 - Pawn Snorlax
1 - Pawn Gengar
1 - Pawn Lapras
1 - Pawn Arcanine
1 - Pawn Onyx
1 - Pawn Pidgeot
1 - Pawn Arbok
2 - Corner Pieces
12 - Edge Pieces
18 - Center Pieces
1 - Box Lid
(Color Two)
1 - King Mewtwo
1 - Queen Pikachu
2 - Bishop Bulbasaur
2 - Knight Charmander
2 - Rook Squirtle
1 - Pawn Ditto
1 - Pawn Snorlax
1 - Pawn Gengar
1 - Pawn Lapras
1 - Pawn Arcanine
1 - Pawn Onyx
1 - Pawn Pidgeot
1 - Pawn Arbok
2 - Corner Pieces
12 - Edge Pieces
18 - Center Pieces
1 - Box Bottom
RepRap
Printer:
Delta
Rafts:
No
Supports:
Yes
Resolution:
.1 mm or smaller for pawns
Infill:
5%
Notes:
Some of... the pawns need support! In particular Pidgeot, Onyx, Arcanine's tail, Gengar's arms, and Arbok's head. I recommend using your slicing software to do so. I tried to add some myself, but they aren't great. Also, I used a 0.2mm nozzle instead of the 0.5 mm one I started with. Definitely recommend smallest nozzle possible, as there is a lot of tiny details in the pawns.
How I Designed This
Thank you's
Thank you to everyone who put their pokemon designs online. It made my job super easy, well relatively easy. Also, a huge thanks to roshandp1 and 1sPiRe who created super cool chess designs for everyone to download and print!
Designer
stetskol3d model description
I loved roshandp1's pokemon chess set. But, I felt like it could be a lot cooler if the pawns were all higher level pokemon. I found files for Arbok, ...Pidgeot, Snorlax, Ditto, Arcanine, Lapras, Gengar, and Onyx, scaled them down to fit on top of the pawn. All freeCAD source files for the pawns are included in the files. I also included the chess board and box, courtesy of 1sPiRe, that I printed to have a full Chess Set. I wish I would have done this to Aftorres's version, but I found after I had finished.For one full set:
(Color One)
1 - King Mew
1 - Queen Pikachu
2 - Bishop Bulbasaur
2 - Knight Charmander
2 - Rook Squirtle
1 - Pawn Ditto
1 - Pawn Snorlax
1 - Pawn Gengar
1 - Pawn Lapras
1 - Pawn Arcanine
1 - Pawn Onyx
1 - Pawn Pidgeot
1 - Pawn Arbok
2 - Corner Pieces
12 - Edge Pieces
18 - Center Pieces
1 - Box Lid
(Color Two)
1 - King Mewtwo
1 - Queen Pikachu
2 - Bishop Bulbasaur
2 - Knight Charmander
2 - Rook Squirtle
1 - Pawn Ditto
1 - Pawn Snorlax
1 - Pawn Gengar
1 - Pawn Lapras
1 - Pawn Arcanine
1 - Pawn Onyx
1 - Pawn Pidgeot
1 - Pawn Arbok
2 - Corner Pieces
12 - Edge Pieces
18 - Center Pieces
1 - Box Bottom
3d model print parameters
Printer brand:RepRap
Printer:
Delta
Rafts:
No
Supports:
Yes
Resolution:
.1 mm or smaller for pawns
Infill:
5%
Notes:
Some of... the pawns need support! In particular Pidgeot, Onyx, Arcanine's tail, Gengar's arms, and Arbok's head. I recommend using your slicing software to do so. I tried to add some myself, but they aren't great. Also, I used a 0.2mm nozzle instead of the 0.5 mm one I started with. Definitely recommend smallest nozzle possible, as there is a lot of tiny details in the pawns.
How I Designed This
Thank you's
Thank you to everyone who put their pokemon designs online. It made my job super easy, well relatively easy. Also, a huge thanks to roshandp1 and 1sPiRe who created super cool chess designs for everyone to download and print!
