Pressure fit cable chain link 3D for print
4096 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
This is an alternate design for the bottom link of the cable chain designed by lRobertl found here: https://www.youmagine.com/d...esigns/ultimaker2-cable-chain
I wanted the end of the chain to hold itself firmly in place, but still without drilling holes in the floor of the Ultimaker for screws. The notch at the end of this link fits into the hole that the cable passes through and is held in place by the flex of the plastic.
Designer
Brian Franklin3d model description
Bottom chain segment.This is an alternate design for the bottom link of the cable chain designed by lRobertl found here: https://www.youmagine.com/d...esigns/ultimaker2-cable-chain
I wanted the end of the chain to hold itself firmly in place, but still without drilling holes in the floor of the Ultimaker for screws. The notch at the end of this link fits into the hole that the cable passes through and is held in place by the flex of the plastic.
