Openrc 1:10 4wd touring concept rc car 3D for print
1368 Views 1 Likes 0 Downloads Download
This i were it started, here iis my first go at creating a printable rc car which later resulted in the OpenRC Truggy car.
I... learned alot from this car and so it is a little bit different. It is has belt drive and is built on a aluminum plate so it is not as "printable" as it´s successor, the Truggy (https://www.youmagine.com/designs/openr-c-1-10-4wd-truggy-concept-r-c-car).
If you like build one of your own, the belts are from an Xray car (don´t remember the model) and bought at Amainhobbies.com, driveshafts are from Conrad.com.
If somebody would like to build one let me know and i will post some more info!
As always questions and answers to be found here:https://plus.google.com/u/0/communities/112745535856143176146OpenRC
Designer
Daniel Norée3d model description
The first OpenRC Car!This i were it started, here iis my first go at creating a printable rc car which later resulted in the OpenRC Truggy car.
I... learned alot from this car and so it is a little bit different. It is has belt drive and is built on a aluminum plate so it is not as "printable" as it´s successor, the Truggy (https://www.youmagine.com/designs/openr-c-1-10-4wd-truggy-concept-r-c-car).
If you like build one of your own, the belts are from an Xray car (don´t remember the model) and bought at Amainhobbies.com, driveshafts are from Conrad.com.
If somebody would like to build one let me know and i will post some more info!
As always questions and answers to be found here:https://plus.google.com/u/0/communities/112745535856143176146OpenRC
