Printed box for pcbs (parametric) 3D for print
1519 Views 3 Likes 0 Downloads Download the piece here from 3dforprint
This box is parametric... so you can change it if you like. I've tossed a couple of loops on the bottom to secure it with zip ties for the project I'm working on.
- printed parts (box and lid)
- M1.8 x 6mm screws (or other as appropriate for your PCB)
-... #6 x 5/8" flathead wood screw (for closing box lid)
Designer
John Ridley3d model description
A small box for holding a common 3x7cm project PCB commonly available on eBay. Parametric so you can use it for other purposesThis box is parametric... so you can change it if you like. I've tossed a couple of loops on the bottom to secure it with zip ties for the project I'm working on.
3d model print parameters
3x7 circuit board with your awesome circuit built on it- printed parts (box and lid)
- M1.8 x 6mm screws (or other as appropriate for your PCB)
-... #6 x 5/8" flathead wood screw (for closing box lid)
