Plafil v1 slotcar chassis 3D for print
1235 Views 1 Likes 0 Downloads Download
I call the chassis PLAFIL because its fully filled with the PLA material.
Its comparable with a Plafit chassis, o...nly this one has steering.
Its still V1.
for an update i will study the one an English guy did on shapeways..http://www.shapeways.com/blog/archives/1858-3d-printing-slot-cars-for-sloppy-70s-handling-and-swagge...already.
Combines with the already uploaded gears design...
-screws M3
-nuts M3
-brushconnectors
-slotcarmotor
-wire
-brass tube D4-d3-36 mm.(bearing)...
Designer
DIYTOYS3d model description
1:24 slotcar chassis with steeringI call the chassis PLAFIL because its fully filled with the PLA material.
Its comparable with a Plafit chassis, o...nly this one has steering.
Its still V1.
for an update i will study the one an English guy did on shapeways..http://www.shapeways.com/blog/archives/1858-3d-printing-slot-cars-for-sloppy-70s-handling-and-swagge...already.
Combines with the already uploaded gears design...
3d model print parameters
-2 nails 1mm.-screws M3
-nuts M3
-brushconnectors
-slotcarmotor
-wire
-brass tube D4-d3-36 mm.(bearing)...
