5 print-in-place bracelets and necklaces 3D for print
1199 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
The “20 Bead Bracelet” and “54 Bead Necklace” fit adults. Other sizes are provided for children or other uses.
Spheres can be tricky to print well. The best way to print these is to raise the object 3mm off the build plate and add supports underneath. “Line” supports with density increased to 40% works well in Cura.
“5 Test Beads” are provided to calibrate settings before printing a larger piece.
Designer
DaveMakesStuff3d model description
Five sizes of print-in-place beads that can be used as necklaces or bracelets. These beads can be remixed to add shapes or objects to the beads, as lo...ng as you do not modify the inner joint geometry.The “20 Bead Bracelet” and “54 Bead Necklace” fit adults. Other sizes are provided for children or other uses.
Spheres can be tricky to print well. The best way to print these is to raise the object 3mm off the build plate and add supports underneath. “Line” supports with density increased to 40% works well in Cura.
“5 Test Beads” are provided to calibrate settings before printing a larger piece.
