This is my Fully 3D-Printed Phone Holder for your desk, car or Space station? Find out how why this is designed for space, and see it in action in my ...YouTube video: https://youtu.be/TPQqFZdLm9o
Not print in place enough for you? See my “elevated” print in place Phone holder, where I combine it with a print in place scissor jack!: https://cults3d.com/en/3d-model/gadget/elevated-print-in-place-phone-holder
Print settings:
Layer height: 0.2mm or finer
Infill: 15-30% - Cubic
Cooling fan: 100%
Z-Seam alignment: Random
Top and bottom layers: 3, with lines pattern
Horizontal expansion compensation: -This is printer specific; I use -0.07mm, but I included a test piece for easier tuning.
Check out my social media for sneak peaks and memes:
YouTube
Facebook
Instagram
3d model print parameters
Layer height: 0.2mm or finer
Infill: 15-30% - Cubic
Cooling fan: 100%
Z-Seam alignment: Random
Top and bottom layers: 3, with lines pattern
Horiz...ontal expansion compensation: -This is printer specific; I use -0.07mm, but I included a test piece for easier tuning.