Printrbot simple corner accessory mount 3D for print
1044 Views 0 Likes 0 Downloads Download
Designed to clamp to the front right corner of the Printrbot Simple with a self-... threading hole. Primarily made for a camera mount, however, may need an additional part to adjust camera angle. Add-on designs coming soon.
NOTE: this is a press-fit design. May need to provide some extra force when mounting to the printer for the first time.
This model was printed with 1 perimeter, and only 1 solid layer on the top and bottom. Reprinting with 3 perimeters led to a mount that did not fit together well. It is suggested that you print with only one perimeter or adjust your settings for a better fitting part. Alternatively, you can use sandpaper to open up the slots.
Designed By: Tommy Bertken
The Printrbot Printrn
-1/4-20 nut...
Designer
printrbot3d model description
Designed to clamp to the front right corner of the Printrbot Simple.Designed to clamp to the front right corner of the Printrbot Simple with a self-... threading hole. Primarily made for a camera mount, however, may need an additional part to adjust camera angle. Add-on designs coming soon.
NOTE: this is a press-fit design. May need to provide some extra force when mounting to the printer for the first time.
This model was printed with 1 perimeter, and only 1 solid layer on the top and bottom. Reprinting with 3 perimeters led to a mount that did not fit together well. It is suggested that you print with only one perimeter or adjust your settings for a better fitting part. Alternatively, you can use sandpaper to open up the slots.
Designed By: Tommy Bertken
The Printrbot Printrn
3d model print parameters
-1/4-20 threaded rod-1/4-20 nut...
