Adjustable heavy duty filament spool 3D for print
1014 Views 2 Likes 0 Downloads Download
The arm and hook are like on the original, but the Hub has been redone to work with both 3 and 6 adjustable arms as well as to fit the Ultimaker mount.
Just print a hub and the amount of arms you need to get a super-sturdy filament spool for your Faberdashery (or other) filament. Then print the the following files from http://www.thingiverse.com/thing:33461:
fluxline_rod.stlfluxline_cap.stlfluxline_spacer_big_spool.stlfluxline_Spool_mount_V3.stlFasten the rod to the spool mount, the spool mount to the Ultimaker, add the spacer, then the spool and finally the Cap.
Designer
jensa3d model description
This is a remix of the brilliant Adjustable Heavy Duty Filament Spool (http://www.thingiverse.com/thing:19122) by @KillerGardevoir for use with the Ul...timaker mount (http://www.thingiverse.com/thing:33461) made by @fluxline.The arm and hook are like on the original, but the Hub has been redone to work with both 3 and 6 adjustable arms as well as to fit the Ultimaker mount.
Just print a hub and the amount of arms you need to get a super-sturdy filament spool for your Faberdashery (or other) filament. Then print the the following files from http://www.thingiverse.com/thing:33461:
fluxline_rod.stlfluxline_cap.stlfluxline_spacer_big_spool.stlfluxline_Spool_mount_V3.stlFasten the rod to the spool mount, the spool mount to the Ultimaker, add the spacer, then the spool and finally the Cap.
