Protective visor by 3dverkstan 3D for print

Designer

Erik Cederberg

3d model description

Protective visor optimized for fast FDM printing
For complete information, please check out the main site at http://Faceshield.nu

The plastic shie...ld can be made out of any semi-stiff plastic sheet between 0.1 and 1mm, including overhead film, cover sheets for binding machines etc, as long as it is available in a suitable format.

There currently are 5 different versions. One for SWEDEN, two are for EUROPE, two for NORTH AMERICA and one compatible with the Prusa style laser cut shields.

Read more about the different versions:
https://3dverkstan.se/protective-visor/protective-visor-versions/

Please read the print guide for recommended settings
https://3dverkstan.se/protective-visor/protective-visor-print-guide/

If you need it to sit tighter on your head or if you are leaning over patients a lot and worry about it falling off, a simple rubber band or elastic hair band can be put over the two hooks in the back.

You need approx a 210x210mm build area to print two at a time, and about 160x190mm if you are OK with only doing one at a time.
Read more

3d model print parameters

A4 sheet of transparent plastic (~0.2mm PET recommended)
Hole punch
3D Printer
A rigid filament
A rubber band (if desired)...

Tags

Covid19 Covid-19 Corona Ppe Visor Protective clothing Protective Face shield

License

CC Atribution