Fan Shroud to work with Anders heater block
This is a modified Version of Spirit Fan Mount which can be found here https://www.youmagine.com/designs/...ultimaker-2-fan-mount--2#!design-information
I have been playing with Spirit fan mount and modifying it to to work with Anders heater block. I like this design because it is enclosed and stops any temperature errors caused by open bottom designs.
I have lowered the whole thing by 8mm, this means the bottom of anders heater block is 4mm - 4.5mm away from the fan shroud enclosure, this means i did not have to use any tape as per sprint original design.
I have used ABS for the shroud for the last 2 weeks and had no deformation at all (see red shroud above) and currently running a XT-CF20 shroud with no issues at all. both been run with 250 degrees temperature. Have not tried PLA for the shroud.
I have also opened up the nozzle hole to take the socket that is supplied with Anders nozzle for easy changing of nozzles.