Printable wool winder - mk i 3D for print
3174 Views 5 Likes 0 Downloads Download
This printable wool winder creates c...enter-pull balls from raw hanks of yarn, it must be used in combination with a yarn swift, I will work on a printable swift in the future.
I designed this winder for my mother who was having troubles with her current ball winder, a new equivalent winder was priced around $50. I felt like I could design and make a better winder for only a few $ in purchased parts (most I had around) and plastic. Plus I know how it works so if it breaks I can fix it.
The winders function is pretty simple but really fun to watch. The motion of the winder can be explained as such. The hand crank, when turned causes the center carriage mechanism to rotate around a stationary cone. The motion of the carriage in combination with the stationary cone causes the winding spindle to rotate about its axis. The winding spindle completes one rotation for every nine rotations of the hand crank. The dual spinning motion of the carriage and the spindle is what causes the yarn to take the form of a cylinder.
Qty 2 - 606ZZ Ball Bearings
Qty 2 - 608ZZ Ball Bearings
Qty 1 - Compression Spring, McMaster-Carr P/N 9435K93
...Qty 1 - O-Ring Size -237, McMaster-Carr P/N: 9396K226
Qty 1 - O-Ring Size -254, McMaster-Carr P/N: 9396K245
Qty 1 - 1/4" PTFE Tubing, McMaster-Carr P/N: 5239K12
Qty 3 - M3 x 30mm SHCS
Qty 3 - M3 Hex Nut
Qty 1 - M4 x 40mm SHCS
Qty 1 - M4 x 30mm BHCS
Qty 2 - M4 x 16mm SHCS
Qty 3 - M4 Flat Washer
Qty 2 - M4 NyLoc Hex Nut
Qty 2 - M5 x 25mm SHCS
Qty 2 - M5 Hex Nut
Qty 1 - M6 x 40mm SHCS
Qty 1 - M6 Flat Washer
Qty 2 - M6 Hex Nut
Qty 1 - M8 Hex Nut
Qty 1 - M8 Threaded Rod (65mm Long)
Qty 2 - M10 Hex Nut
Qty 2 - M5 Acorn Nut
Qty 2 - M5 x 35mm FHCS
Qty 4 - 1/2" Tall Rubber Bumpers
Designer
Matthew LaBerge3d model description
This is a printable wool winder, a device used by knitters to turn hanks of yarn into center pull balls of yarn.This printable wool winder creates c...enter-pull balls from raw hanks of yarn, it must be used in combination with a yarn swift, I will work on a printable swift in the future.
I designed this winder for my mother who was having troubles with her current ball winder, a new equivalent winder was priced around $50. I felt like I could design and make a better winder for only a few $ in purchased parts (most I had around) and plastic. Plus I know how it works so if it breaks I can fix it.
The winders function is pretty simple but really fun to watch. The motion of the winder can be explained as such. The hand crank, when turned causes the center carriage mechanism to rotate around a stationary cone. The motion of the carriage in combination with the stationary cone causes the winding spindle to rotate about its axis. The winding spindle completes one rotation for every nine rotations of the hand crank. The dual spinning motion of the carriage and the spindle is what causes the yarn to take the form of a cylinder.
3d model print parameters
Qty 4 - 624ZZ Ball BearingsQty 2 - 606ZZ Ball Bearings
Qty 2 - 608ZZ Ball Bearings
Qty 1 - Compression Spring, McMaster-Carr P/N 9435K93
...Qty 1 - O-Ring Size -237, McMaster-Carr P/N: 9396K226
Qty 1 - O-Ring Size -254, McMaster-Carr P/N: 9396K245
Qty 1 - 1/4" PTFE Tubing, McMaster-Carr P/N: 5239K12
Qty 3 - M3 x 30mm SHCS
Qty 3 - M3 Hex Nut
Qty 1 - M4 x 40mm SHCS
Qty 1 - M4 x 30mm BHCS
Qty 2 - M4 x 16mm SHCS
Qty 3 - M4 Flat Washer
Qty 2 - M4 NyLoc Hex Nut
Qty 2 - M5 x 25mm SHCS
Qty 2 - M5 Hex Nut
Qty 1 - M6 x 40mm SHCS
Qty 1 - M6 Flat Washer
Qty 2 - M6 Hex Nut
Qty 1 - M8 Hex Nut
Qty 1 - M8 Threaded Rod (65mm Long)
Qty 2 - M10 Hex Nut
Qty 2 - M5 Acorn Nut
Qty 2 - M5 x 35mm FHCS
Qty 4 - 1/2" Tall Rubber Bumpers
