Raspberry and raspicam mount for ultimaker 2 3D for print
1168 Views 0 Likes 0 Downloads Download
A mount for a Raspberry case.
...
The one is used is: http://www.thingiverse.com/thing:209100
Print one of each STL to complete (for left version choose Left Hanger, for right version choose Right Hanger)
I found it better to be mounted on the left front side of the printer.
The mount can be flexed a bit to be attached on the case (it shouldn't break). I used the following settings for all the part:
0.2mm layers, 0.8mm shell thickness, 24% infill.
You will need a couple of M3 screws and Nuts (i used 12mm screws).
The arm for the camera can be moved in order to find the best position to take timelapses.
If you need to created different arms:
Screw holes are 3.2mm, height: 3.5mm width: 10mm
There is a version remixed for the UMO:
https://www.youmagine.com/designs/raspberry-mount-for-ultimaker-original
Thanks to the remixer ;)
M3 screws and Nuts (1.2mm)...
Designer
Didier Klein3d model description
This makes it possible to mount a Raspberry with a Raspicam to the UM2 to take timelapses or to monitor with OctoprintA mount for a Raspberry case.
...
The one is used is: http://www.thingiverse.com/thing:209100
Print one of each STL to complete (for left version choose Left Hanger, for right version choose Right Hanger)
I found it better to be mounted on the left front side of the printer.
The mount can be flexed a bit to be attached on the case (it shouldn't break). I used the following settings for all the part:
0.2mm layers, 0.8mm shell thickness, 24% infill.
You will need a couple of M3 screws and Nuts (i used 12mm screws).
The arm for the camera can be moved in order to find the best position to take timelapses.
If you need to created different arms:
Screw holes are 3.2mm, height: 3.5mm width: 10mm
There is a version remixed for the UMO:
https://www.youmagine.com/designs/raspberry-mount-for-ultimaker-original
Thanks to the remixer ;)
3d model print parameters
PLAM3 screws and Nuts (1.2mm)...
