Raspberry pi 2 and b+ case 3D for print
1014 Views 0 Likes 0 Downloads Download
-Easy access to every connector
-Breakable GPIO opening
-Internal mounting holes (4x M2x10)
-Micro SD card does not protrude but still accessible
-Light guide
Raspberry Pi 2 and B+ version has enough power to run a wifi usb stick, 3d printer and logitech camera without another powered usb hub. Reduce the amount of wires around an OctoPrint setup.
Printed with a Solid Utopia V2 at 0.150mm layer height, 100/120mm/s
Enjoy!
Normand
http://solidutopia.com
Designer
Normand Bourdage3d model description
Minimalist case for the new Raspberry Pi 2 and B+ version. All connectors are easily accessible and the GPIO opening is breakable. Hold it together wi...th 4 M2X10 screw.-Easy access to every connector
-Breakable GPIO opening
-Internal mounting holes (4x M2x10)
-Micro SD card does not protrude but still accessible
-Light guide
Raspberry Pi 2 and B+ version has enough power to run a wifi usb stick, 3d printer and logitech camera without another powered usb hub. Reduce the amount of wires around an OctoPrint setup.
Printed with a Solid Utopia V2 at 0.150mm layer height, 100/120mm/s
Enjoy!
Normand
http://solidutopia.com
