Raspberry pi 2 case with mounting bracket 3D for print
1064 Views 0 Likes 0 Downloads Download
I changed it to take M3 locknuts to screw the case together, added a separate... mounting bracket to mount the case and to clear the bottom for cooling when the box is used just sitting somewhere. Also made the box a bit larger on one side to create room for airflow from bottom to top.
I use mine to play music/stream spottify
http://www.pimusicbox.com/
Step file is included if you want to modify, make sure to keep enough holes for cooling.
If you use it with the mounting bracket you need 30mm m3 screws.
I printed mine with a 0.4 nozzle , 0.15 layer
Designer
UltiArjan3d model description
This case is based on this one; http://www.thingiverse.com/thing:922740I changed it to take M3 locknuts to screw the case together, added a separate... mounting bracket to mount the case and to clear the bottom for cooling when the box is used just sitting somewhere. Also made the box a bit larger on one side to create room for airflow from bottom to top.
I use mine to play music/stream spottify
http://www.pimusicbox.com/
Step file is included if you want to modify, make sure to keep enough holes for cooling.
If you use it with the mounting bracket you need 30mm m3 screws.
I printed mine with a 0.4 nozzle , 0.15 layer
