Raspberry pi (model b) case with 75mm vesa mount 3D for print

Designer

0110-m-p

3d model description

Case for your Raspberry Pi Model B with integrated VESA75 mounting provisions.
None of the other cases shared around the web had to offer exactly wha...t I wanted so I decided to design my own. This was a ground up design, but I have to give credit where credit is due. A lot of design cues and dimensions were borrowed from this case... http://www.thingiverse.com/thing:79036

This Raspberry Pi (Model B) case has a few key features that I wanted...

-Access slot for Pi camera
-Screw together design
-Screw mount raspberry pi to case using standard mounting holes
-Built in 75mm VESA mounting tabs.
-Better general fit between components and clearances to all inputs/outputs
-Rotary engine (reuleaux triangle) vent design

Also, the case is designed to use a flush mount microSD card. I use this one and it doesn't stick outside the case at all. http://www.adafruit.com/product/966

If anyone finds any problems (dimensionally or otherwise) post them up so I can get the model fixed. So far I found heard that it should be scaled up by 0.5% by a few people.

- Printed top and bottom halves
- Raspberry Pi Model B
- '#2 screw (1/4" long) for mounting rpi to case
- '#2 screw (1/2" long) for mounting halves together Read more

Tags

Raspberry pi Vesa Rpi Model b Raspberry pi case

License

CC Atribution