3DFORPRINT
Image to STL converter
3D models on demand
English
Español
Sign up
Log in
Raspberry and raspicam mount for ultimaker 2 3D for print
UNLIKE
LIKE
×
Close
3150 Views
0 Likes
0 Downloads
Download
Designer
Didier Klein
3d model description
This makes it possible to mount a Raspberry with a Raspicam to the UM2 to take timelapses or to monitor with Octoprint
A mount for a Raspberry case.
...
The one is used is:
http://www.thingiverse.com/thing
:209100
Print one of each STL to complete (for left version choose Left Hanger, for right version choose Right Hanger)
I found it better to be mounted on the left front side of the printer.
The mount can be flexed a bit to be attached on the case (it shouldn't break). I used the following settings for all the part:
0.2mm layers, 0.8mm shell thickness, 24% infill.
You will need a couple of M3 screws and Nuts (i used 12mm screws).
The arm for the camera can be moved in order to find the best position to take timelapses.
If you need to created different arms:
Screw holes are 3.2mm, height: 3.5mm width: 10mm
There is a version remixed for the UMO:
https://www.youmagine.com/designs/raspberry-mount-for-ultimaker-original
Thanks to the remixer ;)
Read more
3d model print parameters
PLA
M3 screws and Nuts (1.2mm)
...
Tags
Ultimaker 2
Raspberry pi
Camera mount
Accessories printer
License
CC Atribution
Related 3d models with tags
Ultimaker 2 Camera Mount
RasPi B+ camera mount
Compact Low Friction Spool Holder
PRINTED - Ultimate Tripod Mount for OnePlus One V2.0
Modular Mounting System V5
Raspberry Pi camera ball head
Raspberry Pi 3/3+ Case (No supports - one piece)
Quattro RaspberryPi case
The Mountster for PiCam
diskBot™ - DIY Robot Platform - Design Concepts
OnePlus One Camera Tripod Mount
UM2 Printhead top for UMO+
Ultimaker XY blocks with banana tensioner
OnePlusWheel/Camera Rig
PIX-E Gif Camera
Raspberry Pi 3_Modell B - Sleeve with 3.5 TFT (Updated)
UM2 "Olsson Block" Fan Mount
Printrbot Simple Corner Accessory Mount
Ultimaker Toolbox
Ultimaker 2 Fan Shroud
FPV250 tilt camera mount
Fan Base UM2
Raspberry Pi case (model B+ / 2 / 3)
Nozzle Case
Olsson-Block Tools base
Raspberry PI Sleeve
Raspberry Pi (Model B) case with 75mm VESA mount
Raspberry Pi 3 Model B Casing with 40mm Fan
×
Login
Incorrect username or password, please review the data.
You must validate your email before you can enter
Forward validation email.
Login
Have you forgotten your password?
Reset password
Reset password
×
Email
Thanks for signing up 3dforprint
×
We just sent you a message with an activation link. If you haven't received it within 10 minutes, check your spam folder.
An email has been sent to your email account with instructions to reset the password.
We just sent you a message with an activation link. If you haven't received it within 10 minutes, check your spam folder.
×
Sign up
Create your 3dforprint account