Optical Illusion Pinwheel with Bearings
Remix of Optical Illusion Pinwheel from Dalpek
with bigger blades and 608 (2RS) bearings.
Turns into the wi...nd.
Uses original blades, printed with 180% of original size.
Needs three 608 (2RS) bearings and a 4mm diameter rod
3d model print parameters
- Printed with PETG
- Rod needs to be glued in place with epoxy
- Caps should be glued to the bolt with a drop of superglue or epoxy
- Bearings and... bolts (should) fit in place