Rcp 50mm trapezoid edge cube 3D for print
1690 Views 2 Likes 0 Downloads Download
Surfaces will need to be sanded smooth to allow best operation of the cube, and to allow the stickers to adhere properly to the sides.
LulzBot
Printer:
Mini
Rafts:
No
Supports:
Yes
Resolution:
Standard
Infill:
20%
Notes:
The center caps may need... to be adjusted to fit depending on your printer. I find them to be perfect fit with a standard quality print, but a bit loose with a high quality print.
Designer
rcpongo3d model description
This is a 50mm puzzle cube. You will need to provide your own core and screws/springs from another cube. Although this is a mini-sized cube, the core ...is full size. I recommend using a YJ Guanlong core, as these can be found for $3-4 and this has been designed with that core.Surfaces will need to be sanded smooth to allow best operation of the cube, and to allow the stickers to adhere properly to the sides.
3d model print parameters
Printer brand:LulzBot
Printer:
Mini
Rafts:
No
Supports:
Yes
Resolution:
Standard
Infill:
20%
Notes:
The center caps may need... to be adjusted to fit depending on your printer. I find them to be perfect fit with a standard quality print, but a bit loose with a high quality print.
