Redesign housing anders olsson nozzle torque wrench 3D for print
1288 Views 0 Likes 1 Downloads Download
This nozzle holder has six threaded holes for ...the nozzles 0.25, 0.4, 0.6, 0.8, 1.0 and 1.2mm.
I only redesigned the housing, the inner part can be downloaded here: https://www.youmagine.com/designs/nozzle-torque-wrench
I printed the housing with PLA on my Ultimaker2 with 30% infill and I printed it in 3 hours and 15 minutes.
Thanks Anders and Robert for your support.
Designer
Tosch3d model description
I redesigned the housing for this nozzle torque wrench so that it also can be used as a nozzle holder.This nozzle holder has six threaded holes for ...the nozzles 0.25, 0.4, 0.6, 0.8, 1.0 and 1.2mm.
I only redesigned the housing, the inner part can be downloaded here: https://www.youmagine.com/designs/nozzle-torque-wrench
I printed the housing with PLA on my Ultimaker2 with 30% infill and I printed it in 3 hours and 15 minutes.
Thanks Anders and Robert for your support.
