Replacement clip for sony mw600 bt headset 3D for print
1171 Views 0 Likes 0 Downloads Download
This is to replace the moveable clip that got broken. Instead of a spring-loaded clip it becomes a hook you can hang at your collar (even faster to remove / attach than the original).
You will have to mark and drill the 1 mm hole manually as regular printers can't print such a small hole, especially that close to a wall.
To link the two parts together I used a piece of copper wire, worked like a charm!
The source files are Solidworks 2014
- A bit of copper wire as the "shaft"...
Designer
mpatoulachik3d model description
A clip that replaces the original one on a Sony MW600 Bluetooth headset. Not an exact copy but it enables you to hang the receiver at your collar / br...east pocket.This is to replace the moveable clip that got broken. Instead of a spring-loaded clip it becomes a hook you can hang at your collar (even faster to remove / attach than the original).
You will have to mark and drill the 1 mm hole manually as regular printers can't print such a small hole, especially that close to a wall.
To link the two parts together I used a piece of copper wire, worked like a charm!
The source files are Solidworks 2014
3d model print parameters
- Print the clip- A bit of copper wire as the "shaft"...
![[with release hole] Zipper Pull using paperclip](https://www.3dforprint.com/modelos/9420/with-release-hole-zipper-pull-using-paperclip1_medium.webp)
