Respirator breathing mask with hepa filter 3D for print
1437 Views 0 Likes 2 Downloads Download
We also have our own website
3D-mon.com
where we put our premium models up for sale. You can suggest what we should do next on our new
pre-order page
. Follow us on
Facebook
where you can check news and future projects. Also participate in competitions to win prizes.
Happy printing and be safe,
3Demon
Prusa
Printer:
I3 MK3S
Supports:
Yes
Infill:
20
Filament_brand:
Fillamentum
Filament_color:
Vertigo Grey, Melon Ye...llow
Filament_material:
PLA
Post-Printing
Cut out pieces of a HEPA filter vacuum cleaner bag and snap them into the breathing openings. Seal the edges of the mask with EPDM window seal (a 60 cm long strip should be enough) for good airtight adhesion. Then just thread elastic bands through the 4 holes to hold it on your face. Each person's face shape is different so you might need to scale the mask a bit or use a double layer of the window sealer in some places. But with an air tight seal should provide equivalent filtration to a FFP3 mask filtering 99.97 % of particles.
How I Designed This
The aesthetic of the design was based on Scorpion's mask from Mortal Combat.
Designer
3d-mon3d model description
This is a wearable respirator that uses vacuum bag HEPA filters to protect from the spreading of viruses and bacteria. Have a look at the post printin...g section for more information. At 100% scale the mask is made for the average head width of 155 mm. You can scale it how you want to make it fit better, don't forget to scale all the parts the same. Use at your own risk.We also have our own website
3D-mon.com
where we put our premium models up for sale. You can suggest what we should do next on our new
pre-order page
. Follow us on
where you can check news and future projects. Also participate in competitions to win prizes.
Happy printing and be safe,
3Demon
3d model print parameters
Printer brand:Prusa
Printer:
I3 MK3S
Supports:
Yes
Infill:
20
Filament_brand:
Fillamentum
Filament_color:
Vertigo Grey, Melon Ye...llow
Filament_material:
PLA
Post-Printing
Cut out pieces of a HEPA filter vacuum cleaner bag and snap them into the breathing openings. Seal the edges of the mask with EPDM window seal (a 60 cm long strip should be enough) for good airtight adhesion. Then just thread elastic bands through the 4 holes to hold it on your face. Each person's face shape is different so you might need to scale the mask a bit or use a double layer of the window sealer in some places. But with an air tight seal should provide equivalent filtration to a FFP3 mask filtering 99.97 % of particles.
How I Designed This
The aesthetic of the design was based on Scorpion's mask from Mortal Combat.
