Ringholder-hand 3D for print
5050 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
This is a hand with thin fingers and a good stand to stay on your bedside table.
...
I used PLA for this print, with a prusa-type-printer, but it should be possible to print with ebery material your printer can print.
When you print a hollow version (just like mine), it is possible to cut a hole to the bottom and fill some material of weight inside for a better stand.
Designer
Minihawk3d model description
A Hand for carrying your rings at night ...This is a hand with thin fingers and a good stand to stay on your bedside table.
...
3d model print parameters
I printed this out with a size of 75 %, worked well, size about 150mm in height. I used the KISSlicer for it, printed without any infill, but i think ...it will get better with some infill.I used PLA for this print, with a prusa-type-printer, but it should be possible to print with ebery material your printer can print.
When you print a hollow version (just like mine), it is possible to cut a hole to the bottom and fill some material of weight inside for a better stand.
