I noticed my Ikea Lack table was a bit wobbly, so I designed this bracket.
You will need 4 brackets in total, one for each leg. They are designed f...or size 6 screws, with enough holes for 7 in each bracket, which is definitely overkill, so you can probably get away with fewer.
I have included models that have the following on each hole:
-An 82 degree countersink, designed for standard wood screws.
-A more shallow countersink, designed for drywall screws.
-No countersink, designed for normal pan head screws.
These brackets paired with a foam mat below the table have reduced vibration caused by the printer almost entirely.
3d model print parameters
Printer brand:
Robo 3D
Printer:
R1 PLA Model
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.25
Infill:
20%
How I Designed This ...
Designed in Creo Parametric. STL files generated using Autodesk Fusion 360.