Rubber band gun 3D for print
1852 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
I found a wooden gun like this on a market in The Netherlands, it turned out the shooting mechanism was well document...ed in an (expired) patent. The drawings from the patent were cleaned up in Photoshop, then traced in Inkscape and assembled in Blender.
After test fitting (see picture) I adjusted the mechanism a bit to make it run smoother. The gun body is an exact copy from that of the patent but was pimped up a bit with cool hand grip stock and a safety switch.
The video shows that shooting the gun results in rapid firing of the rubber bands.
This is a great toy for boys.
Make sure to print the pegs are printed vertically and use "generate brim" to prevent the pegs from becoming unstable during printi...ng.
The gun body is designed to be printed upside down, i.e. with the barrel flush and parallel to the print surface.
Designer
johan heiszwolf3d model description
Toy gun that shoot rubber bandsI found a wooden gun like this on a market in The Netherlands, it turned out the shooting mechanism was well document...ed in an (expired) patent. The drawings from the patent were cleaned up in Photoshop, then traced in Inkscape and assembled in Blender.
After test fitting (see picture) I adjusted the mechanism a bit to make it run smoother. The gun body is an exact copy from that of the patent but was pimped up a bit with cool hand grip stock and a safety switch.
The video shows that shooting the gun results in rapid firing of the rubber bands.
This is a great toy for boys.
3d model print parameters
Printed in PLA.Make sure to print the pegs are printed vertically and use "generate brim" to prevent the pegs from becoming unstable during printi...ng.
The gun body is designed to be printed upside down, i.e. with the barrel flush and parallel to the print surface.
![Apple Watch Band [Ninjaflex]](https://www.3dforprint.com/modelos/5341/apple-watch-band-ninjaflex1_medium.jpg)
