Salt or sugar (or any powder) dispencer 3D for print
913 Views 0 Likes 0 Downloads Download
Tolerances are built into the model, and might need some minor sanding if... your printer isn't optimal.
'Container' is where your stuff goes
'Divider' is the middle part that enables the varying dispensing. It has a high pitch screw feature in addition to the press fit.
'Lid' are well, the lid :) I added a knurled surface on the outer rim, pleasant to twist and a pleasure to print.
The feel to it is beyond plastic and its crazy strong, but have a 'give' t...o it and makes the
surfaces interact very well.
Designer
catohagen3d model description
I wanted a dispencer with varying amount dispenced, and came up with thisTolerances are built into the model, and might need some minor sanding if... your printer isn't optimal.
'Container' is where your stuff goes
'Divider' is the middle part that enables the varying dispensing. It has a high pitch screw feature in addition to the press fit.
'Lid' are well, the lid :) I added a knurled surface on the outer rim, pleasant to twist and a pleasure to print.
3d model print parameters
I printed a few in Black and Red Greentec (the most amazing filament imho)The feel to it is beyond plastic and its crazy strong, but have a 'give' t...o it and makes the
surfaces interact very well.
![DUTCHdesign EGG-CUP [with spoon holder] EASTER EDITION PART IV](https://www.3dforprint.com/modelos/9867/dutchdesign-eggcup-with-spoon-holder-easter-edition-part-iv1_medium.webp)
