Saraceno knife block 3d model for 3d printers free

3173 Views 2 Likes 0 Downloads Download the piece here from 3dforprint

Designer

DING [Done IN Garage]

3d model description

Alternative knife block
https://www.instructables.com/id/Knife-Block/
Description

Hello everybody!

I've bought a professional knife set at the... last Black Friday at Amazon store:

http://amzn.com/B002ZCKIBM

the knive set comes without block so I created one.
I inspired from this awesome idea:

https://www.instructables.com/id/Knife-Block/

and I remixed the project for FDM printers.

I wolud speak about safety because this thing will be at home and the knives may be dangerous, so it's great idea if you follow three important steps below:

1) Use magnets as described on the project, you can find here:

https://www.amazon.it/Magnetastico%C2%AE-neodimio-frigorifero-permanente-interattiva/dp/B00Z7YVU8A

2) Use rubber pads, print them with TPU95 or other rubber filament

3) Create the ballast, I hope you can create it with milling machine, the one in my project have a weight of 2.3Kg

You need these hardware:

Phillips flat head self tapping screw 4.8mm x 22mm: 2pcs

Phillips flat head self tapping screw 5.5mm x 25mm: 2pcs

Neodymium magnets 8mm x 3mm: 4 pcs

Check everything else on the PDF and pics.