Speyewear 1 3D for print
990 Views 1 Likes 0 Downloads Download
This is a pair of glasses. The lenses are attached on the frame by small screws. I also upload the lenses as template.The base curv...e of the lenses is 6.
Update (18 Dec 2017)!
I updated the files. Now, there are hinges to assemble the temples to the frame. You can use filament (1.75mm) as a pin for the hinge. I leave the original stl files in case someone wants to use metallic hardware.
Infill : 20%
Brim : yes
support : yes...
Designer
Stamos3d model description
A pair of glassesThis is a pair of glasses. The lenses are attached on the frame by small screws. I also upload the lenses as template.The base curv...e of the lenses is 6.
Update (18 Dec 2017)!
I updated the files. Now, there are hinges to assemble the temples to the frame. You can use filament (1.75mm) as a pin for the hinge. I leave the original stl files in case someone wants to use metallic hardware.
3d model print parameters
Layer Height : 0.1mmInfill : 20%
Brim : yes
support : yes...
