Scalable pv breaker box 3D for print
3050 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
This is a scalable solar breaker box with removable lid to accommodate a standalone breaker device.
Use PLA or ABS.
Set infill = 20%
Set walls = 2
Set layers = 0.25
No supports
No rafts
Method:
This box is for indoor use onl...y. It is not sealed or waterproof.
The OpenScad file is included.
Edit the variables at the top of the scad file to suit your needs.
OpenScad creates a warning that the case body is not manifold, but this is nothing to be concerned about. It is a warning for the power cable holes in the side of the box. The project prints fine. You can ignore the warning.
Be sure to download the Write.scad files as this project prints text on the breaker guard.
The files are included with this project or can be found online at http://www.thingiverse.com/thing:16193 .
Many thanks to Thingiverse user HarlanDMii for creating this text module!
This project has 3 parts:
- box body
- box cover
- breaker switch protection guard
Requirements:
(4) screws for cover plate install
(4) screws to attach the box to a solid surface
+ your breaker
Designer
cpayne3d3d model description
This customizable PV Solar breaker box was designed to accommodate a standalone 100A breaker for connection between the solar battery bank and the AC ...inverter.This is a scalable solar breaker box with removable lid to accommodate a standalone breaker device.
3d model print parameters
Print info:Use PLA or ABS.
Set infill = 20%
Set walls = 2
Set layers = 0.25
No supports
No rafts
Method:
This box is for indoor use onl...y. It is not sealed or waterproof.
The OpenScad file is included.
Edit the variables at the top of the scad file to suit your needs.
OpenScad creates a warning that the case body is not manifold, but this is nothing to be concerned about. It is a warning for the power cable holes in the side of the box. The project prints fine. You can ignore the warning.
Be sure to download the Write.scad files as this project prints text on the breaker guard.
The files are included with this project or can be found online at http://www.thingiverse.com/thing:16193 .
Many thanks to Thingiverse user HarlanDMii for creating this text module!
This project has 3 parts:
- box body
- box cover
- breaker switch protection guard
Requirements:
(4) screws for cover plate install
(4) screws to attach the box to a solid surface
+ your breaker
