Colorfabb cannon 3D for print
936 Views 0 Likes 0 Downloads Download
Print off all the parts and connect together.
Everything is push - fit so not glue s...hould be required. To get good details on the barrel i suggest to print with a small nozzle like 0.25 or 0.3 and low layer height like 0.06 or 0.8mm
Print list
Bronzefill:
- Barrel x 1
Corkfill: - Legs x 2 ( one needs to be mirrored ) - Wheel x 2 - Rear Brace x 1 - Front Brace x 1 - Wheel Retainer x 1 - Axil Pin x 2
Dark Grey
nGen or PLA:- Wheel Rim x 2 ( to be printed with 0.4mm nozzle no infill or top/bottm and spiralize turn on ) - Barrel Retainer x 2 - Barrel Adjuster x 1 ( has a small thread so low layer height and small nozzle recommended, Support roof 80% recommended ) - Adjuster Holder x 1 - Handle x 2 ( Support roof 80% recommended ) - Axil x 1 - Wheel Washer x 2 - Bolt - Short x 6 - Bolt - Long x 4
Corkfill
Dark Grey nGen or PLA...
Designer
Labern3d model description
Old style Cannon design to be used with Bronzefill and CorkfillPrint off all the parts and connect together.
Everything is push - fit so not glue s...hould be required. To get good details on the barrel i suggest to print with a small nozzle like 0.25 or 0.3 and low layer height like 0.06 or 0.8mm
Print list
Bronzefill:
- Barrel x 1
Corkfill: - Legs x 2 ( one needs to be mirrored ) - Wheel x 2 - Rear Brace x 1 - Front Brace x 1 - Wheel Retainer x 1 - Axil Pin x 2
Dark Grey
nGen or PLA:- Wheel Rim x 2 ( to be printed with 0.4mm nozzle no infill or top/bottm and spiralize turn on ) - Barrel Retainer x 2 - Barrel Adjuster x 1 ( has a small thread so low layer height and small nozzle recommended, Support roof 80% recommended ) - Adjuster Holder x 1 - Handle x 2 ( Support roof 80% recommended ) - Axil x 1 - Wheel Washer x 2 - Bolt - Short x 6 - Bolt - Long x 4
3d model print parameters
BronzefillCorkfill
Dark Grey nGen or PLA...
