Secret geometry medallion 3D for print
3432 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
This is a medallion that you can wear around your neck. Of course it can also be opened, so you can put something in it. Now you can alwa...ys carry something precious with you :-). The images show, that the front is actually a sliding lid. Sliding the lid up opens the medallion.
The internal space is 32.5mm wide and 5mm high. The pendant.stl on which it can be hung on a chain, is also a closing mechanism. When the medallion is hanging, the pendant keeps the lid closed. Therefor, this medallion cannot just open unnoticed, if you wear it around your neck.
I printed this medallion in PLA. Then I put it 6 times in the primer. Then I applied the red and silver paint. Under the silver is also blue paint. Finally I taped the lid and added black.
The pendant is attached to the back by means of a piece of paper clip. If it is around 1mm thick, it is good to use.
I also included a total assembly STL so you can see the whole object in 3D. The filename is “complete.stl”.
If you have any questions feel free to ask :-)
This medallion is designed for an FDM printer, with a nozzle opening of 0.4mm. The print resolution I used is 0.1mm. The back.s...tl and lid.stl parts must be printed with print support material.
Designer
JOB3d model description
#ANYCUBIC3DThis is a medallion that you can wear around your neck. Of course it can also be opened, so you can put something in it. Now you can alwa...ys carry something precious with you :-). The images show, that the front is actually a sliding lid. Sliding the lid up opens the medallion.
The internal space is 32.5mm wide and 5mm high. The pendant.stl on which it can be hung on a chain, is also a closing mechanism. When the medallion is hanging, the pendant keeps the lid closed. Therefor, this medallion cannot just open unnoticed, if you wear it around your neck.
I printed this medallion in PLA. Then I put it 6 times in the primer. Then I applied the red and silver paint. Under the silver is also blue paint. Finally I taped the lid and added black.
The pendant is attached to the back by means of a piece of paper clip. If it is around 1mm thick, it is good to use.
I also included a total assembly STL so you can see the whole object in 3D. The filename is “complete.stl”.
If you have any questions feel free to ask :-)
3d model print parameters
3D printing settingsThis medallion is designed for an FDM printer, with a nozzle opening of 0.4mm. The print resolution I used is 0.1mm. The back.s...tl and lid.stl parts must be printed with print support material.
