Self-watering planter (small) 3D for print


 Self-watering planter (small)  3d model for 3d printers

 Self-watering planter (small)  3d model for 3d printers
 Self-watering planter (small)  3d model for 3d printers Self-watering planter (small)  3d model for 3d printers Self-watering planter (small)  3d model for 3d printers Self-watering planter (small)  3d model for 3d printers Self-watering planter (small)  3d model for 3d printers
366 Views 0 Likes 0 Downloads Download

Designer

PARALLEL GOODS

3d model description

Introducing the first design from Parallel Goods.
This Self-Watering Planter is exactly the growing environment your plants need, while giving you fl...exibility in your watering routine. It’s super easy to use: just plant your favorite herb or other water-intensive plant, add water, and you’re all set.
The Self-Watering Planter was designed to be 3D printed, easy to setup, use, and clean; while at the same time allow for customization through mixing and matching different colors for the pot and reservoir. Be sure to check out the Instructions tab to make sure you get the most out this Self-Watering Planter.
This Self-Watering Planter is part of our Desk Collection, available now along with other great designs at parallelgoods.co
Follow us on Twitter & Instagram @parallelgoods and stay tuned!


3d model print parameters

Printing Instructions
This Self-Watering Planter was design to be printed in PLA, and we went through many iterations and lots of experimentation to ...develop settings which would allow for a water tight print. All of our testing and development was done in PLA to ensure success across a wide variety of printers, without causing too much of an impact to the environment.
Water Tight PLA Slic3r Settings. • Layer Height: .3mm
• Vertical Shells (Perimeters): 3. • Horizontal Shells (Solid Layers): Top – 4, Bottom – 4
• Infill: 10%. • Speed: Top Solid Infill – 15mm/s, Solid infill – 15mm/s
• Prints WITHOUT supports.The extra top & bottom shells combined with the slow solid infill print speeds ensure a thick and even wall for the bottom of the reservoir which provides water tight print. Your mileage may vary, but these settings should give you a fine starting point for use on your own printer.
If you're unable to get a water tight print, we recommend coating the bottom of the reservoir in Titebond-3 Wood Glue. This particular wood glue is waterproof, but still non-toxic, solvent free, and is FDA approved for indirect food contact (i.e. cutting boards).
Use Instructions
• Set the pot in the reservoir, add your plant of choice, and fill the reservoir to the line inside of the spout.
• Refill whenever you can’t see any water in the spout. Every few cycles it’s helpful to let the soil dry out to prevent mold from growing inside the pot.


Tags

Design Garden Gardening Indoor Interior Plant Planter Planters Plants Pot Pots Stand Watering Urban

License

CC Attribution-NonCommercial-NoDerivs

Related 3d models with tags

Self-Watering Planter (Small)

Self-Watering Planter (Small)

Spout V1 (Bottle Cap) - 3Dponics Gardening Tools

Spout V1 (Bottle Cap) - 3Dponics Gardening Tools

Right Cover - 3Dponics Snap & Grow Garden

Right Cover - 3Dponics Snap & Grow Garden

Aerator - 3Dponics Home and Garden

Aerator - 3Dponics Home and Garden

Vegetable Mould - 3Dponics Gardening Tools

Vegetable Mould - 3Dponics Gardening Tools

Drip Emitter V1 (Bolt) - 3Dponics Emitters & Plugs

Drip Emitter V1 (Bolt) - 3Dponics Emitters & Plugs

Drip Emitter V2 (No wings) - 3Dponics Emitters & Plugs

Drip Emitter V2 (No wings) - 3Dponics Emitters & Plugs

Bird Feeder Lid - 3Dponics Home and Garden

Bird Feeder Lid - 3Dponics Home and Garden

Drip Emitter V1 (Nut) - 3Dponics Emitters & Plugs

Drip Emitter V1 (Nut) - 3Dponics Emitters & Plugs

Bottle Opener - 3Dponics Home and Garden

Bottle Opener - 3Dponics Home and Garden

Bottle Opener - 3Dponics Home and Garden

Bottle Opener - 3Dponics Home and Garden

Irrigation Plug - 3Dponics Emitters & Plugs

Irrigation Plug - 3Dponics Emitters & Plugs

Square Lid - 3Dponics Cube System

Square Lid - 3Dponics Cube System

Left Cover - 3Dponics Snap & Grow Garden

Left Cover - 3Dponics Snap & Grow Garden

Lid - 3Dponics Herb Garden

Lid - 3Dponics Herb Garden

Planter - 3Dponics Snap & Grow Garden

Planter - 3Dponics Snap & Grow Garden

Container - 3Dponics Herb Garden

Container - 3Dponics Herb Garden

Planter - 3Dponics Herb Garden

Planter - 3Dponics Herb Garden