Skylake delid tool 3D for print
1423 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
!!!!!You may Try out the Kaby-LAKE Delid tool as Skylake CPUs should also work with it !...!!!!
https://www.youmagine.com/designs/intel-kaby-lake-delid-tool
A simple tool to remove the Heatspreader of your Skylake CPU.
tested with 6600K, 6700K, 4790K , G3258 (Skylake / Devils Canyon / Haswell )
May also work some other Haswell/Broadwell/Devils Canyon 115x CPUs (Heatspreader with sharp corners, only partially tested)
* print both parts,
* put some sort of rubber or foam on the inner bottom of the base.
* put the CPU into the CPU-holder with the long PCB part looking over the end of the tray.
* then put it in your vice and close it carefully.
For enough strengh print at least with 3 perimeters and 30% infill !
USE AT YOUR OWN RISK !!!
* Only for CPUs who are glued and with thermal-paste, not for soldered CPUs
EDIT: Does not Work with Ivybridge (* If someone is able to try out Ivybridge (round Heatspreader corners) it would be cool to give a feedback if it works, as i dont have such a CPU for test. )
A vice. - do NOT use a screw clamp !
a 3D printer that can print very exact, the dimensions are very tight to ensure t...hat the cpu won`t jump out while pressing.
´For optimal results print with 0,1mm layerheight or less and use PLA with high infill.
Designer
Chri3d model description
A simple delid tool that i made for chopping Intel 115x CPU.!!!!!You may Try out the Kaby-LAKE Delid tool as Skylake CPUs should also work with it !...!!!!
https://www.youmagine.com/designs/intel-kaby-lake-delid-tool
A simple tool to remove the Heatspreader of your Skylake CPU.
tested with 6600K, 6700K, 4790K , G3258 (Skylake / Devils Canyon / Haswell )
May also work some other Haswell/Broadwell/Devils Canyon 115x CPUs (Heatspreader with sharp corners, only partially tested)
* print both parts,
* put some sort of rubber or foam on the inner bottom of the base.
* put the CPU into the CPU-holder with the long PCB part looking over the end of the tray.
* then put it in your vice and close it carefully.
For enough strengh print at least with 3 perimeters and 30% infill !
USE AT YOUR OWN RISK !!!
* Only for CPUs who are glued and with thermal-paste, not for soldered CPUs
EDIT: Does not Work with Ivybridge (* If someone is able to try out Ivybridge (round Heatspreader corners) it would be cool to give a feedback if it works, as i dont have such a CPU for test. )
3d model print parameters
Some sort of thin foam/rubberA vice. - do NOT use a screw clamp !
a 3D printer that can print very exact, the dimensions are very tight to ensure t...hat the cpu won`t jump out while pressing.
´For optimal results print with 0,1mm layerheight or less and use PLA with high infill.
