Small fidget spinner 3D for print
10763 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
A friend asked if I could make a fidget spinner for a young child with very small hands.
I includ...ed OBJ and Solidworks files. Feel free to edit and improve. Thanks!
Put the small caps on a 608 skate bearing. (You might have to use a hammer to get the tabs to seat in it, but that won;t hurt... the bearing.
Seat the bearing into one side of the spinner. Put three 10mm loose ball bearings into the three cups.
Apply superglue or epoxy, then put on the second side.
Designer
Lasivian3d model description
A small fidget spinner suitable for small hands.A friend asked if I could make a fidget spinner for a young child with very small hands.
I includ...ed OBJ and Solidworks files. Feel free to edit and improve. Thanks!
3d model print parameters
Print 2 of each part.Put the small caps on a 608 skate bearing. (You might have to use a hammer to get the tabs to seat in it, but that won;t hurt... the bearing.
Seat the bearing into one side of the spinner. Put three 10mm loose ball bearings into the three cups.
Apply superglue or epoxy, then put on the second side.
