Small strawblox christmas tree 3D for print
1748 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Full instructions to make the tree can be found here
http://www.icanmakehq.com/strawblox/recipe/small_tree
You'll need 40 baubles to fully populate the tree. Print them at a high infill (50%) to make them sturd...y. The branches can be printed at between 5% and 20% depending on machine (we print at 5% infill on MakerBots and PrintrBots and at 20% on Ultimakers).
Designer
I Can Make3d model description
A simple, but fun to make Christmas decoration based on our Strawblox construction system (http://icanmakehq.com/strawblox). Part of the 2015 collecti...on of Advent makes from here at I Can Make.Full instructions to make the tree can be found here
http://www.icanmakehq.com/strawblox/recipe/small_tree
3d model print parameters
One normal drinking straw (5mm in diameter)You'll need 40 baubles to fully populate the tree. Print them at a high infill (50%) to make them sturd...y. The branches can be printed at between 5% and 20% depending on machine (we print at 5% infill on MakerBots and PrintrBots and at 20% on Ultimakers).
