Smart one handed bottle opener 3D for print
1156 Views 0 Likes 0 Downloads Download
>>> GrOpener is the creation of Mark Manger, an Applied Artist from Denver, Colorado. Inspired by the stick & screw openers Mark encountered in Africa in the 1990′s, the GrOpener uses the same leverage principle, but in a form that allows a bottle to be opened through the act of grabbing it. <<<
Versio 4 (updated 23.6.14):
Now there is 4 different editions:
- Edition one: Basic OHBO
- Edition two: OHBO with magne...t.
- Edition three: OHBO with a coin.
- Edition four: OHBO with magnet and a coin.
BTW: Other side (tail) of OHBO is meant to opening cans! (You can stick it under the clip)
Magnets from dx.com (here is a link: http://www.dx.com/p/10050078w-round-ndfeb-magnets-silver-50-pcs-239991)
Coin is a basic 1cent euro coin.
You will also need some super glue if printing a Edition 2,3 or 4.
All editions are right scaled and tested. I recommend to print with 100% infill (layer height 0.2mm). My prints are PLA plastic but I think that ABS is even better because it is harder and stronger! I hope you to make one! I like to see how is your own bottle opener like!
visit: http://www.thingiverse.com/thing:269463
Materials and methods
- REQUIRED:
- Hard plastic printed with 100% infill (I use PLA but ABS can be even better)
- OPTIONAL to make OHBO better:
- (magnets from DX.com, link in description)
- (1 cent euro coin)
- (super glue)
- (key chain circle and some chain)
Documents
Span1 jamrendering 2587 851220160401 30109 138ovoc
One Handed Bottle Opener V.4 Edition1
STL – 650 kb
Version 1 - Apr 01, 2016
Updated on 01-04-2016 – 2:16 h – 12 g – 14×69×101 mm
Span1 jamrendering 2587 851120160404 6534 7a97wn
One Handed Bottle Opener V.4 Edition2
STL – 680 kb
Version 1 - Jul 07, 2014
2:16 h – 12 g – 14×69×101 mm
Span1 jamrendering 2587 851020160401 29990 ifrddc
One Handed Bottle Opener V.4 Edition3
STL – 670 kb
Version 1 - Apr 01, 2016
Updated on 01-04-2016 – 2:19 h – 12 g – 14×69×103 mm
Span1 jamrendering 2587 851320160404 6517 xliphe
One Handed Bottle Opener V.4 Edition4
STL – 700 kb
Version 1 - Apr 01, 2016
Updated on 01-04-2016 – 2:19 h – 12 g – 14×69×103 mm
Issues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.
Designer
Tino Kaartovuori3d model description
>>> THIS IS NOT INVENTED BY ME. THIS IS INVENTED BY MARK MANGER. I HIGHLY RECOMMEND TO VISIT GROPENER WEBSITE: "https://www.gropener.com/". THERE YOU ...CAN BUY THE ORIGINAL BOTTLE OPENER MADE IN ALUMINUM. <<<>>> GrOpener is the creation of Mark Manger, an Applied Artist from Denver, Colorado. Inspired by the stick & screw openers Mark encountered in Africa in the 1990′s, the GrOpener uses the same leverage principle, but in a form that allows a bottle to be opened through the act of grabbing it. <<<
3d model print parameters
My first ever 3D creation!Versio 4 (updated 23.6.14):
Now there is 4 different editions:
- Edition one: Basic OHBO
- Edition two: OHBO with magne...t.
- Edition three: OHBO with a coin.
- Edition four: OHBO with magnet and a coin.
BTW: Other side (tail) of OHBO is meant to opening cans! (You can stick it under the clip)
Magnets from dx.com (here is a link: http://www.dx.com/p/10050078w-round-ndfeb-magnets-silver-50-pcs-239991)
Coin is a basic 1cent euro coin.
You will also need some super glue if printing a Edition 2,3 or 4.
All editions are right scaled and tested. I recommend to print with 100% infill (layer height 0.2mm). My prints are PLA plastic but I think that ABS is even better because it is harder and stronger! I hope you to make one! I like to see how is your own bottle opener like!
visit: http://www.thingiverse.com/thing:269463
Materials and methods
- REQUIRED:
- Hard plastic printed with 100% infill (I use PLA but ABS can be even better)
- OPTIONAL to make OHBO better:
- (magnets from DX.com, link in description)
- (1 cent euro coin)
- (super glue)
- (key chain circle and some chain)
Documents
Span1 jamrendering 2587 851220160401 30109 138ovoc
One Handed Bottle Opener V.4 Edition1
STL – 650 kb
Version 1 - Apr 01, 2016
Updated on 01-04-2016 – 2:16 h – 12 g – 14×69×101 mm
Span1 jamrendering 2587 851120160404 6534 7a97wn
One Handed Bottle Opener V.4 Edition2
STL – 680 kb
Version 1 - Jul 07, 2014
2:16 h – 12 g – 14×69×101 mm
Span1 jamrendering 2587 851020160401 29990 ifrddc
One Handed Bottle Opener V.4 Edition3
STL – 670 kb
Version 1 - Apr 01, 2016
Updated on 01-04-2016 – 2:19 h – 12 g – 14×69×103 mm
Span1 jamrendering 2587 851320160404 6517 xliphe
One Handed Bottle Opener V.4 Edition4
STL – 700 kb
Version 1 - Apr 01, 2016
Updated on 01-04-2016 – 2:19 h – 12 g – 14×69×103 mm
Issues
Issues are used to track todos, bugs or requests. To get started, you could create an issue.
