Snap ball (truncated icosahedron) 3D for print
709 Views 0 Likes 0 Downloads Download
See here for video: https:...//youtu.be/C-KsbcPzaH4
See here for stable download: https://social.thangs.com/m/109485
In the model shown, the “Penta” pieces are printed in black, the “Hex” pieces are printed in white. A complete ball requires 20 of the “Hex” pieces and 12 of the “Penta” pieces. The files provided will create a ball that is 100mm in diameter.
This design minimizes that amount of material needed to print large spheres, and also allows for multicolour balls by printing pieces in different colours. You do not need supports to print, but you will need to ensure good bed adhesion.
The pieces hold together on their own and will not need glue.
The tolerance between pieces is intentionally tight and will require some force to assemble. You can loosen the fit by filing of the thicker bottom layer “elephant foot” on each piece, or by scaling up the pieces slightly to increase the space between. Be sure to do a few small test prints first before printing a whole batch.
Designer
DaveMakesStuff3d model description
These pieces snap together to form a spherical truncated icosahedron, a shape recognizable as a football or soccer ball.See here for video: https:...//youtu.be/C-KsbcPzaH4
See here for stable download: https://social.thangs.com/m/109485
In the model shown, the “Penta” pieces are printed in black, the “Hex” pieces are printed in white. A complete ball requires 20 of the “Hex” pieces and 12 of the “Penta” pieces. The files provided will create a ball that is 100mm in diameter.
This design minimizes that amount of material needed to print large spheres, and also allows for multicolour balls by printing pieces in different colours. You do not need supports to print, but you will need to ensure good bed adhesion.
The pieces hold together on their own and will not need glue.
The tolerance between pieces is intentionally tight and will require some force to assemble. You can loosen the fit by filing of the thicker bottom layer “elephant foot” on each piece, or by scaling up the pieces slightly to increase the space between. Be sure to do a few small test prints first before printing a whole batch.
