Sneakerbot in filaflex by recreus 3D for print
1229 Views 0 Likes 3 Downloads Download
During months we have investigated and work hard to develop the 1.75 mm filaflex format. Snea...kerbots are the actual proof that shows filaflex works becoming in the most elastic filament on the market.
The sneakerbots by Ignacio Garcia are inspIred by 80s films such us back to the future, starwars, short circuit etc.
Should be noted that the new design is more comfortables than first one. You can vary the softness changing the percentage of infill. The tongue makes that laces don't hurt foot.
Hope you print them, wear them and be the coolest maker in your city!!
https://www.youtube.com/watch?v=tH4ppW-p8JQ
LAYER HEIGHT: 0.2mm
PRINT SPEED: 90mm/s
INFILL: 25%
PRINTER: PRUSA I3
TIME: 23 hrs....
Designer
IGNACIO3d model description
The new sneakers by Recreus printed in Filaflex 1.75mm.During months we have investigated and work hard to develop the 1.75 mm filaflex format. Snea...kerbots are the actual proof that shows filaflex works becoming in the most elastic filament on the market.
The sneakerbots by Ignacio Garcia are inspIred by 80s films such us back to the future, starwars, short circuit etc.
Should be noted that the new design is more comfortables than first one. You can vary the softness changing the percentage of infill. The tongue makes that laces don't hurt foot.
Hope you print them, wear them and be the coolest maker in your city!!
https://www.youtube.com/watch?v=tH4ppW-p8JQ
3d model print parameters
SLICER: CURA 14.01LAYER HEIGHT: 0.2mm
PRINT SPEED: 90mm/s
INFILL: 25%
PRINTER: PRUSA I3
TIME: 23 hrs....
