Snoopy - mmu 3D for print
8319 Views 4 Likes 0 Downloads Download the piece here from 3dforprint
Snoopy is Charlie Brown's pet beagle. He is is a loyal, innocent, imaginative ...and good-natured beagle who is prone to imagining fantasy lives, including being an author, a college student known as "Joe Cool" and a World War I Royal Flying Corps ace.
The model requires supports under the eaves of the roof. No supports are required inside the house under the roof, in spite of what your slicer may suggest!
The model, as presented is 70mm tall.
This MMU model was derived from my non-MMU model (reworked for a clean MMU print):
https://cults3d.com/en/3d-model/various/snoopy-reddadsteve
Enjoy! And don't forget to post your makes.
Please excuse the red bleed into the white on my posted make. I'm still learning the MMU2S and have only been sticking with the default settings for now. Parameters for more wiping should be set before the swap to white.
I've also included all the STL files in case you use a different slicer.
The supplie...d 3MF is for the smallest recommended size of the model. The model can be sized up without issue, but I would not recommend sizing it down any further.
The STL files should be sized up to 70mm tall or larger for a good print.
Designer
REDDADSTEVE3d model description
MMU version of Snoopy, from the comic strip Peanuts by Charles Schulz.Snoopy is Charlie Brown's pet beagle. He is is a loyal, innocent, imaginative ...and good-natured beagle who is prone to imagining fantasy lives, including being an author, a college student known as "Joe Cool" and a World War I Royal Flying Corps ace.
The model requires supports under the eaves of the roof. No supports are required inside the house under the roof, in spite of what your slicer may suggest!
The model, as presented is 70mm tall.
This MMU model was derived from my non-MMU model (reworked for a clean MMU print):
https://cults3d.com/en/3d-model/various/snoopy-reddadsteve
Enjoy! And don't forget to post your makes.
Please excuse the red bleed into the white on my posted make. I'm still learning the MMU2S and have only been sticking with the default settings for now. Parameters for more wiping should be set before the swap to white.
3d model print parameters
The 3MF file contains 'support enforcers' for the Prusa Slicer.I've also included all the STL files in case you use a different slicer.
The supplie...d 3MF is for the smallest recommended size of the model. The model can be sized up without issue, but I would not recommend sizing it down any further.
The STL files should be sized up to 70mm tall or larger for a good print.
![Schnappi bust [German Cartoon Crocodile]](https://www.3dforprint.com/modelos/7291/schnappi-bust-german-cartoon-crocodile1_medium.png)
