Tweezers - 20 different all purpose ready-to-print tweezers from 80 mm/3.1" to 160 mm/6.3" 3D for print
476 Views 2 Likes 0 Downloads Download
Needed one, made many, thought I should share. Not as sophisticated as some (sometimes slightly over-engineered) really interesting designs I found on Thingiverse. Just plain, functional, surprisingly strong, easy to print tweezers, applicable to a wide range of use cases.
They come in 20 different varieties, in five sizes from pretty small (80 mm/3.1") to pretty big (160 mm/6.3"), in two widths (8 mm and 12 mm) and with narrow and broad tips.
80 mm (3.1") long, 8 and 12 mm wide, narrow and wide tip
100 mm (3.9") long, 8 and 12 mm wide, narrow and wide tip
120 mm (4.7") long, 8 and 12 mm wide, narrow and wide tip
140 mm (5.5") long, 8 and 12 mm wide, narrow and wide tip
160 mm (6.3") long, 8 and 12 mm wide, narrow and wide tip
As usual, I print mine using this cheap, strong, and easy to print Carbon Fiber PLA , which adds that extra strength to all prints, but of course pretty much any filament will do.
They also look real good in Silk Silver or Gold, but are not as strong.
HOPE YOU LIKE THEM, AND IF YOU LIKE THEM, PLEASE LIKE THEM. THANKS!
Designer
e&h Design3d model description
A collection of 20 different all purpose, ready-to-print tweezers from pretty small (80 mm/3.1") to pretty big (160 mm/6.3") with narrow and wide tips... for scrap filament removal, sorting screws, soldering, handling small electronic components... and of course sorting gummy bears by color :-)Needed one, made many, thought I should share. Not as sophisticated as some (sometimes slightly over-engineered) really interesting designs I found on Thingiverse. Just plain, functional, surprisingly strong, easy to print tweezers, applicable to a wide range of use cases.
They come in 20 different varieties, in five sizes from pretty small (80 mm/3.1") to pretty big (160 mm/6.3"), in two widths (8 mm and 12 mm) and with narrow and broad tips.
80 mm (3.1") long, 8 and 12 mm wide, narrow and wide tip
100 mm (3.9") long, 8 and 12 mm wide, narrow and wide tip
120 mm (4.7") long, 8 and 12 mm wide, narrow and wide tip
140 mm (5.5") long, 8 and 12 mm wide, narrow and wide tip
160 mm (6.3") long, 8 and 12 mm wide, narrow and wide tip
3d model print parameters
PRINTING. This should be an extremely simple (and fast) print. You will not need any supports (or plate adhesion). Print in 0.2 mm resolution with 50%... infill.As usual, I print mine using this cheap, strong, and easy to print Carbon Fiber PLA , which adds that extra strength to all prints, but of course pretty much any filament will do.
They also look real good in Silk Silver or Gold, but are not as strong.
HOPE YOU LIKE THEM, AND IF YOU LIKE THEM, PLEASE LIKE THEM. THANKS!
