Spatial one - 3d delta printer 3D for print
990 Views 0 Likes 0 Downloads Download
A video below shows the printer in action
All information and drawings etc are also available on my website www.andornot.co.uk, i will be writing some blogs about the build and the choice of parts over the next coming weeks whilst i researched into designing this machine.
Specification:
Print Technology: Fused filament fabrication (FFF)
Print Media: PLA, ABS, Nylon, etc any material with extrusion temperature up to 300C except flexible filament (new extruder and hot end platform to print such materials coming soon)
Build Volume: 270 diameter x 300mm height (diameter varies depending on single or dual hot ends)
Layer Resolution: 0.1 to 0.4mm
Filament Diameter: 1.75mm
Extrusion Speed: Travel speeds of 500mm/s and print speeds of 80-100mm/s for draft, 40mm/s for fine printing, this will be matter of your printing preference.
Mechanical:
Materials: Anodised aluminium, 304 stainless steel, pla printed parts
Construction: Robust metal construction with some printed parts.
Moving Parts: Preloaded ball raced vertical slides to eliminate any adjustment required and play. Igus rod ends and industrial bearings.
Electrics:
Electronics: Smoothie board 5xc, capable of dual extruders, with GLCD graphic controller
AC input: 100-240VAC 50-60Hz
Power Requirements: 24VDC @ 500w and 12VDC @ 15w
Connectivity: USB and ethernet
Special Features:
Auto levelling: Aluminum heated bed with FSR levelling. Auto levelling of the bed using calibration functions built into the smoothie board
Interchangeable End Effector: Interchangeable end effector, currently with a single hot end, further developments such as dual extruder, chocolate printer and ceramic printer. 12 way plug and socket for easy swap between different end effectors.
Designer
Andrew Wade3d model description
3D Delta printer designed for robustness and accuracy of the moving parts. A kit with manufactured sheetmetal and machined parts, powered by a smoothi...e board with industrial bearings. The printer was demonstrated at the 2015 TCT show and now is available as a kit from www.andornot.co.ukA video below shows the printer in action
All information and drawings etc are also available on my website www.andornot.co.uk, i will be writing some blogs about the build and the choice of parts over the next coming weeks whilst i researched into designing this machine.
Specification:
Print Technology: Fused filament fabrication (FFF)
Print Media: PLA, ABS, Nylon, etc any material with extrusion temperature up to 300C except flexible filament (new extruder and hot end platform to print such materials coming soon)
Build Volume: 270 diameter x 300mm height (diameter varies depending on single or dual hot ends)
Layer Resolution: 0.1 to 0.4mm
Filament Diameter: 1.75mm
Extrusion Speed: Travel speeds of 500mm/s and print speeds of 80-100mm/s for draft, 40mm/s for fine printing, this will be matter of your printing preference.
Mechanical:
Materials: Anodised aluminium, 304 stainless steel, pla printed parts
Construction: Robust metal construction with some printed parts.
Moving Parts: Preloaded ball raced vertical slides to eliminate any adjustment required and play. Igus rod ends and industrial bearings.
Electrics:
Electronics: Smoothie board 5xc, capable of dual extruders, with GLCD graphic controller
AC input: 100-240VAC 50-60Hz
Power Requirements: 24VDC @ 500w and 12VDC @ 15w
Connectivity: USB and ethernet
Special Features:
Auto levelling: Aluminum heated bed with FSR levelling. Auto levelling of the bed using calibration functions built into the smoothie board
Interchangeable End Effector: Interchangeable end effector, currently with a single hot end, further developments such as dual extruder, chocolate printer and ceramic printer. 12 way plug and socket for easy swap between different end effectors.
