Sphere ii 3D for print
1354 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Sphere II is a spherical multi color mood light.
The 29 WS2812 RGB LEDs are placed on a spherical stand inside a... glass diffusor. The LEDs are controlled by a Teensy 2 board.
- 29 [WS2812 breakout boards](http://www.watterott.com/de/WS2812-Breakout)
- 58 screws M2x6
- 57 1x3 pin header (for easier led connection)
- 4 servo cables (~20 cm)
- an Arduino, teensy board or something similar to control the LEDs.
Designer
Carsten Müller3d model description
A multi color spherical moodlightSphere II is a spherical multi color mood light.
The 29 WS2812 RGB LEDs are placed on a spherical stand inside a... glass diffusor. The LEDs are controlled by a Teensy 2 board.
3d model print parameters
1 [spherical glass shade](http://www.amazon.de/Reality-Leuchten-Tischleuchte-Schnurschalter-R5220-07/dp/B0037TDXNW/ref=sr_1_8?s=kitchen&ie=UTF8&qid=1...418837917&sr=1-8&keywords=Tischleuchte+20cm)- 29 [WS2812 breakout boards](http://www.watterott.com/de/WS2812-Breakout)
- 58 screws M2x6
- 57 1x3 pin header (for easier led connection)
- 4 servo cables (~20 cm)
- an Arduino, teensy board or something similar to control the LEDs.
