Liquid soap time saver
This is an attachment to save you having to wait for a small amount of liquid soap to trickle to the dispensing end of the bot...tle. Yes, there are other ways to solve this world problem but they don't involve messing around with 3D printers! :)
Unscrew the top, fit the WULBI and screw the top back on. Stand the bottle on the WULBI. Soap can be dispensed immediately!
3d model print parameters
Printer: Ender 3
Resolution: 0.20 mm
Speed 50mm/s
Material: PETG
Nozzle Temp: 240°
Bed Temp: 70°
Infill: 10%
Walls: 3
Top Layers: 4
Bottom ...Layers: 3
Brim: 3mm
Set the print seam to the rear for a smoother print.